The Walnut Wood Hotel Keychain is made from 100% solid walnut wood, with a square 15 mm x 15 mm (0.59 in) cross-section and a length of 6.5 cm (2.56 in).
| Material | 100% solid walnut wood |
|---|---|
| Size | 15 mm x 15 mm x 6.5 cm (0.59 x 0.59 x 2.56 in), square-cut vertical bar |
| Chain and Ring | Antique-copper / aged-finish metal |
| Surface Finish | Two coats of hardwax |
| Personalization | Hotel name + room number, laser engraved, free of charge |
| Minimum Order Quantity | 5 pieces |
| Production Time | 6-15 business days (custom production) |
| Made In | Architab, Nevşehir / Cappadocia (Nar) workshop, Türkiye |
The Walnut Wood Hotel Keychain is made from 100% solid walnut wood, with a square 15 mm x 15 mm (0.59 in) cross-section and a length of 6.5 cm (2.56 in). Your hotel name is engraved on one face and the room number on the adjacent face; engraving is included at no extra charge. Each fob ships with an antique-copper aged metal chain and ring, finished with two coats of hardwax. The minimum order is 5 pieces, so a small guesthouse can order alongside a 60-room hotel. Custom production is completed within 6-15 business days of order confirmation, handcrafted in our Cappadocia (Türkiye) workshop. Our other keychain models are solid pine; this is our only solid walnut option, built for boutique hotels and stone-built properties that want a darker, heavier fob. As a solid wood hotel keychain manufacturer based in Nevşehir, we also cut matching wooden door numbers from the same walnut grain, so a hotel can order room keychains and door signage from one workshop.
Not a veneer or thin panel. Each fob is cut from a solid 15x15 mm walnut bar, so the grain shows across the whole cross-section, not just the surface.
The hotel name and room number are laser engraved with no added fee. Name and number sit on adjacent vertical faces, so both stay legible on a narrow bar.
Every keychain ships with two coats of hardwax. Hardwax soaks into the wood pores and forms a protective, low-sheen finish rather than sitting on top like lacquer.
The 15x15 mm square cross-section and beveled top give the fob an angular feel in hand, distinct from the rounder shapes elsewhere in our keychain range.
Order from as few as 5 units, so a 5-room guesthouse can place a custom order without matching a large hotel's volume. Reorders follow the same minimum.
Production runs at Architab's Nar workshop in Nevşehir, Cappadocia, combining CNC cutting with hand finishing. Each fob is hardwax-treated individually after engraving.
The square bar carries the hotel name on one face and the room number on the adjacent face, both engraved vertically. On a flat panel these two lines of information would compete for the same surface; the square cross-section gives each one its own face instead. Line up a set of these fobs at a stone-built boutique hotel's reception desk and both the property name and the room number read clearly at a glance.
The fob stays attached to the room key handed over at reception, keeping the hotel name and room number visible together at check-in and check-out. Walnut's dark grain (Juglans genus) suits stone hotels, cave rooms, and rustic boutique interiors better than a lighter wood. Our pine keychain models fit lighter, more rustic settings; walnut is the darker, more premium option in the same range.
As a walnut key tag for boutique hotel use, this model suits smaller, concept-driven properties where the hand weight of solid wood makes a different impression than a plastic or acrylic fob.
| Material | 100% solid walnut wood |
|---|---|
| Size | 15 mm x 15 mm x 6.5 cm (0.59 x 0.59 x 2.56 in), square-cut vertical bar |
| Chain and Ring | Antique-copper / aged-finish metal |
| Surface Finish | Two coats of hardwax |
| Personalization | Hotel name + room number, laser engraved, free of charge |
| Minimum Order Quantity | 5 pieces |
| Production Time | 6-15 business days (custom production) |
| Made In | Architab, Nevşehir / Cappadocia (Nar) workshop, Türkiye |
| Feature | Acrylic / Thin Wood Panel Alternative | Architab Walnut Wood Hotel Keychain |
|---|---|---|
| Material structure | Thin panel or acrylic veneer | Solid walnut block, 15x15 mm cross-section |
| Surface | Tinted or painted finish | Natural walnut grain, two coats of hardwax |
| Personalization | Limited, often an added engraving fee | Hotel name + room number, free laser engraving |
| Minimum order | Commonly 10 pieces and up in the market | Production from 5 pieces |
| Shape | Flat, thin panel (around 4 mm) | Square-cut solid bar (15x15 mm) |
| Manufacturing transparency | Origin rarely stated | Nevşehir / Cappadocia workshop, traceable |
| Category position | Generic promotional-product listing | Only solid walnut model in the keychain range |
Send your hotel name, room count, and preferred chain finish over WhatsApp or email.
We plan your order from a 5-piece minimum together with the engraving sequence for your room numbers.
The hotel name and room number layout is confirmed with you before production starts.
Custom production is completed within 6-15 business days of order confirmation.
Reach us via WhatsApp (+90 384 219 33 00) or info@hitab.net to start an order.
Send your hotel name and room count via WhatsApp (+90 384 219 33 00) or info@hitab.net, and we'll confirm your bulk production plan starting from a 5-piece minimum order.
You might also like
